This proposal seeks funding for investigations into the structure and mechanical properties of carbon-nanostructures produced from natural biomass sources and by novel processing techniques. Carbon fibres produced by these routes are attractive since they are cheaper than those obtained by conventional routes (PAN or pitch-based), are derived from a renewable resource and since native cellulose is often already structured, it is an attractive precursor material. In addition to this, native sources of cellulose, such as bacterial, tunicate and derived sources from plant material in the form of whiskers, have fibre diameters in the nanometer range. This enables very slender fibres to be produced which can offer high stiffnesses and strengths. Other sources of nanofibres, such as from CNTs (carbon nanotubes) are expensive to produce, and as such there are significant advantages to the approaches we will investigate. The use of these materials for high performance composites will be investigated using non-contact methods and novel approaches to better understand the interface between materials. Low-cost approaches to the development of high-throughput methods of producing fibres will be addressed, with particular emphasis on enabling the enhancement of material properties from waste and cheaply generated biomass. Additional adventurous research will be conducted on the manipulation and deformation of the nanostructures using a FIB (Focussed Ion Beam) system. The project will fund a postdoctoral research associate for 4 years who will be based in the Materials Science Centre, School of Materials, University of Manchester. No systematic programme of research into the capability of these materials has been investigated in this manner and as such the impact will be both of mutual academic and industrial relevance. In terms of industrial involvement we have the support of five industrial companies (Borregaard - supplier; Technical Fibre Products / end user; Renishaw - technology and Lenzing - suppliers and technology).

This proposal seeks funding for investigations into the structure and mechanical properties of carbon-nanostructures produced from natural biomass sources and by novel processing techniques. Carbon fibres produced by these routes are attractive since they are cheaper than those obtained by conventional routes (PAN or pitch-based), are derived from a renewable resource and since native cellulose is often already structured, it is an attractive precursor material. In addition to this, native sources of cellulose, such as bacterial, tunicate and derived sources from plant material in the form of whiskers, have fibre diameters in the nanometer range. This enables very slender fibres to be produced which can offer high stiffnesses and strengths. Other sources of nanofibres, such as from CNTs (carbon nanotubes) are expensive to produce, and as such there are significant advantages to the approaches we will investigate. The use of these materials for high performance composites will be investigated using non-contact methods and novel approaches to better understand the interface between materials. Low-cost approaches to the development of high-throughput methods of producing fibres will be addressed, with particular emphasis on enabling the enhancement of material properties from waste and cheaply generated biomass. Additional adventurous research will be conducted on the manipulation and deformation of the nanostructures using a FIB (Focussed Ion Beam) system. The project will fund a postdoctoral research associate for 4 years who will be based in the Materials Science Centre, School of Materials, University of Manchester. No systematic programme of research into the capability of these materials has been investigated in this manner and as such the impact will be both of mutual academic and industrial relevance. In terms of industrial involvement we have the support of five industrial companies (Borregaard - supplier; Technical Fibre Products / end user; Renishaw - technology and Lenzing - suppliers and technology).

Mankind faces great challenges in providing sufficient supplies of renewable energy, in protecting our environment, and in developing benign processes for the chemical and pharmaceutical industries. These urgent problems can only be solved by applying the best available technology, but this requires a solid foundation of fundamental knowledge created through a multidisciplinary yet focussed approach. Catalysis is an essential enabling technology because it holds the key to solving many of these problems. CASTech aims to build on the science and engineering advances developed in previous collaborative programmes involving the main participants. Specifically, new core competencies for the investigation of reactions in multiphase systems will be developed. These will include MR imaging techniques (University of Cambridge, UCam); computational fluid dynamics (UCam); spectroscopic methods (QUB); SSITKA (QUB); flow visualisation and particle tracking (PEPT) (University of Birmingham, UBir); theoretical calculations (University of Virginia, UVa; QUB) for liquid phase processes. An enhanced time resolution fast transient and operando spectroscopy capability will be developed for investigating the mechanisms and the nature of the active sites in heterogeneous catalytic gas phase reactions (QUB). These core competencies will be applied to investigate the activation of saturated alkanes, initially building on our recent success in oxidative cracking of longer chain alkanes.We propose to develop our experimental and modelling capabilities with the objective of providing quantitative data on how to enhance the performance of a catalytic system by understanding and controlling the interaction between the solvent(s), the substrates and the catalyst surface. We aim to be able to describe the structure of liquids in catalytic systems at multiscale from the external (bulk) liquid phase to inside the porous structure of the catalyst and at the catalyst surface. The research will integrate new experimental probes and complementary theoretical approaches to help us understand liquid structures and we will use this information in collaboration with our industrial partners to address specific technical challenges.Bio-polymeric materials, e.g. cellulose and lignin, have the potential to provide functionalised building blocks for both existing and novel chemical products. Our ultimate aim is to provide novel and economically viable processes for the conversion of lignin into high value-added products. However, by starting with the conversion of lignosulphonates into vanillin and other higher value chemicals we will develop not only new processes but also the core competencies required to work with more complex fluids.Biogas (CH4 + CO2) can be produced from many different renewable sources but capturing and storing the energy is difficult on a small distributed scale. We propose to investigate a new, economic, down-sized engineering approach to the conversion of methane to dimethylether. This will be achieved by reducing the number of unit operations and developing new catalysts capable of performing under the more extreme temperature conditions that will be required to make the process economic.The drive to use catalysts for cleaner more sustainable chemistry needs also to address the inherently polluting and unsustainable process of catalyst manufacture itself. We will investigate the sustainable production of supported catalysts using electrochemical deposition of the metal. This method bypasses several conventional steps and would generate very little waste. In all these Grand Challenges there will be close collaboration between all the academic and industrial groups.

Abstracts are not currently available in GtR for all funded research. This is normally because the abstract was not required at the time of proposal submission, but may be because it included sensitive information such as personal details.

Abstracts are not currently available in GtR for all funded research. This is normally because the abstract was not required at the time of proposal submission, but may be because it included sensitive information such as personal details.